…mmWave radios for sensing besides communications in 5G and beyond networks. This involves integrating learning-based activity detection algorithms with 5G and 6G radio hardware. “Using radios for sensing besides communications…
…online services to be easily accessible. The latest version of 6gflagship.com website was published in May 2022. The site continues to be updated continuously in content, in structure and in…
…truly multisource energy harvester built from only a single piece of material as the energy conversion component is proposed. This review, from the aspect of materials and device configurations, explains…
…candidate spectra making it more complicated than the single bin detector. Herein, a simplified version of spectrum matching detector using a rectangular reference spectrum is investigated. It is shown that…
In the next generation wireless communication systems operating at near terahertz frequencies, dielectric substrates with the lowest possible permittivity and loss factor are becoming essential. In this work, highly porous…
This paper presents measurements on dynamic off-body radio channels in an ultra wideband frequency range for wireless body area network communications focusing on the human body shadowing effect. Measurements were…
…consumes power of 17 mW. In simulations, an improvement in power consumption by 4.3 mW and phase noise by 1.5 dBc/Hz were achieved when compared to conventional LC Tank VCO….
…loss tangent values were 0.008 for ER182, 0.034 for ER182/7%BST and 0.081 for ER182/30%BST. The directivity of ER182 material lens and WR3 waveguide combination was 26 dBi at 300 GHz….
…antenna performs well at 4 GHz with a 500 MHz bandwidth which is compliant with the IEEE 802.15.6 standard for Body Area Networks (BAN). A preliminary study on the single…
…ideal system, one composed of isolated decision-making appliances that are also simultaneously connected within the same physical grid, may worsen system stability. This undesirable outcome results from the synchronization of…